PowerGrip Laser Lever & Dust Collector

• 2 In 1 Functions: This electric suction vacuum drilling dust collector not only can be used as the dust collector, but also can be used as the laser level.

• Laser Level Function: With the laser and 2 horizontal bubbles. This function can be used for advertising, furniture installation, decoration construction, line positioning, etc.
• Air Suction Bracket: The air suction wall bracket load-bearing capacity can reach 5KG, which is suitable for placing your laser level instrument or other equipment. (laser level instrument not included)
• Detachable Design: The dust collector can use the dust collector and bracket functions separately, you can push the button then to remove or install the dust collector or bracket to use.

• A Healthier Use Experience: With this tool, the wall drilling construction is easier, dust won't fly around while drilling, and you won't be inhaling that dust, and give you a better using experience.
• Built-in Battery: This electric dust collector is powered by a built-in high-capacity lithium battery, so you can recharge it in time when it is out of power.
• 13mm Hole: 13mm large hole design, the inner brush can avert dust leakage, suitable for all kinds of drilling construction.
• Power/Adsorption Monitoring: The two columns of green lights below the horizontal bubbles are the monitoring of power and adsorption. If the power is too low or the air pressure is too low, they will prompt you respectively.

Specifications:

• Material: ABS
• Laser color: Red
• Bracket load: 5KG
• Battery: 1 * lithium battery, 1800mAh (included)
• Laser power: <1mw
• Protection level: IP54
• Recharging voltage: 3.7V
• Working noise: ≤60db
• Item size: 190 * 77 * 52mm / 7.5 * 3.0 * 2.0in
• Item weight: 277g / 9.8ounce
   

Packing List:
1 * Dust Collector
1 * Bracket
1 * USB Cable